Analytical Specialties . : : . PRODUCTS . : : . Advanced Reflux Sampler

Advanced Reflux Sampler Brochure

PDF: 367k (view) (save)

Advanced Reflux Sampler Presentation

PDF: 365k (view) (save)

Advanced Reflux Sampler Application Questionnaire

PDF: 12k (view) (save)

ATEX- Œ approved (Self Acting Versions)

The Analytical Specialties Advanced Reflux Sampler is designed to provide conditioning for severe service analysis needs using a simple self contained two stage system. The first stage is designed to provide filtration of particulate and passive cooling. As the sample reaches the second stage, it is directed through a transition piece which channels the air evenly across two active cooling elements. The cooling elements provide 360 degree contact between sample and coolant. As the cooling takes place, condensate and Heavy Hydrocarbons removed from the sample are gravity fed back through the reflux section, washing the sample inlet of particulate and other fouling compounds. Temperature is tightly controlled with a single point temperature measurement fed to a controller which cycles the two active cooling elements.

Tight Temperature Control - High quality, consistent sample for analysis. Can be controlled to within 0.5°F of set point.

High Throughput - Reduced sample transport time. Up to 5LPM.

Improved Cooling Efficiency - Lower utility costs.

Maintanable - All components are field serviceable.

Adaptable - System can be tuned for optimum control, set point can be changed remotely.

Mounting:

Vertical (90° +/- 5°)

Inlet Pressure:

2-600 psig(10.5-4200kPa)

Controller:

Electronic PID / site DCS PIC Control / Self Acting Proportional (non electronics, no power required)

Outlet Temperature:

40-200°F(5-94°C)

Wetted Material:

316SS, 304SS, Teflon® (optional Titanium, Carpenter 20, other on request)

Sample Flow:

1-5 LPM

Inlet Connection:

2”-3” 150# R.F. ANSI Flange

Sample Temperature:

50-1500°F (10-815°C)

Coolant:

Air-2.5SCFM @ 75-100psig for 1LPM throughput.
5.5 SCFM for 3LPM throughput